POWER CABLE

  • HV Armoured Power Cables : TICI, TIOI  Rated Voltage: 3.6/6kV、6/10kV、8.7/15kV、12/20kV

    HV Armoured Power Cables : TICI, TIOI Rated Voltage: 3.6/6kV、6/10kV、8.7/15kV、12/20kV

    Applicable to shipboard & offshore power, telecommunication and control data cables. Fixed installation purpose. Low smoke halogen free and
    flame retardant.

  • MPRXCX® 331 0.6/1 (1.2) kV

    MPRXCX® 331 0.6/1 (1.2) kV

    MPRXCX® 331 type is used on board of ships at all levels and open decks for fixed
    installations complying with IEC standards 60092-352 and in safety circuits, where
    fire resistance is required. The good screening qualities of the braid also reduce
    radio interference and electrical influences to electronic installations. MPRXCX® 331
    type meets the IEC 60331 fire characteristics, withstands IEC 60332-3-22 fire test
    on bunched cables and performs to the SOLAS requirements. All materials used to
    produce this cable are halogen free. This design ensures that non corrosive and low
    toxic gases are emitted in case of fire.
  • MPRXCX®  -FLEX 0.6/1 (1.2) kV

    MPRXCX® -FLEX 0.6/1 (1.2) kV

    MPRXCX® -FLEX type is used on board of ships in all locations below the upper metallic
    deck for fixed installations complying with IEC standards 60092-352. MPRXCX® -FLEX
    using is recommended for installations in narrow space. MPRXCX® -FLEX type withstands
    IEC 60332-3-22 fire test on bunched cables and performs to the SOLAS requirements.
    All materials used to produce this cable are halogen free. This design ensures that non
    corrosive and low toxic gases are emitted in case of fire.
  • MPRXCX®  0.6/1 (1.2) kV

    MPRXCX® 0.6/1 (1.2) kV

    MPRXCX® type is used on board of ships at all levels and open decks for installations
    complying with IEC standards 60092-352. The good screening qualities of the braid
    also reduce radio interference and electrical influences to electronic installations.
    MPRXCX® type withstands IEC 60332-3-22 fire test on bunched cables and performs
    to the SOLAS requirements. All materials used to produce this cable are halogen free.
    This design ensures that non corrosive and low toxic gases are emitted in case of fire.
  • MPRX® 331 0.6/1 (1.2) kV

    MPRX® 331 0.6/1 (1.2) kV

    MPRX® 331 type is used on board of ships in all locations below the upper metallic
    deck for fixed installations complying with IEC standards 60092-352 and in safety
    circuits, where fire resistance is required. MPRX® 331 type meets the IEC 60331 fire
    resistant performances, withstands IEC 60332-3-22 fire test on bunched cables and
    performs to the SOLAS requirements. All materials used to produce this cable are
    halogen free. This design ensures that non corrosive and low toxic gases are emitted
    in case of fire.
  • MPRX® -FLEX 0.6/1 (1.2) kV

    MPRX® -FLEX 0.6/1 (1.2) kV

    deck for fixed installations complying with IEC standards 60092-352. MPRX® -FLEX
    using is recommended for installations in narrow space.
    MPRX® -FLEX type withstands IEC 60332-3-22 fire test on bunched cables and
    performs to the SOLAS requirements. All materials used to produce this cable are
    halogen free. This design ensures that non corrosive and low toxic gases are emitted
    in case of fire.
  • MPRX® 0.6/1 (1.2) kV

    MPRX® 0.6/1 (1.2) kV

    MPRX® type is used on board of ships in all locations below the upper metallic deck for
    fixed installations complying with IEC standards 60092-352. MPRX® type withstands
    IEC 60332-3-22 fire test on bunched cables and performs to the SOLAS requirements.
    All materials used to produce this cable are halogen free. This design ensures that non
    corrosive and low toxic gases are emitted in case of fire.
  • 0.6/1kV CU/MGT/XLPE/ OA.SCR/LSZH/SWA/LSZH Power Cable

    0.6/1kV CU/MGT/XLPE/ OA.SCR/LSZH/SWA/LSZH Power Cable

    For used in power transmission and distribution system, suitable for outdoor use at temperature range
    from -52℃ to +80℃. For VSD system application.

  • 0.6/1kV CU/XLPE/ OA.SCR/LSZH/SWA/LSZH Power Cable

    0.6/1kV CU/XLPE/ OA.SCR/LSZH/SWA/LSZH Power Cable

    For used in power transmission and distribution system. suitable for outdoor use at temperature range
    from -52℃ to +80℃. For VSD system application.

  • 0.6/1kV CU/XLPE/LSZH Earthing Cable

    0.6/1kV CU/XLPE/LSZH Earthing Cable

    For used in light fitting, and in switching and control equipment. suitable for outdoor use at temperature
    range from -52℃ to +80℃.

  • 0.6/1kV CU/MGT/XLPE/LSZH/SWA/LSZH Power Cable

    0.6/1kV CU/MGT/XLPE/LSZH/SWA/LSZH Power Cable

    For used in power transmission and distribution system, suitable for outdoor use at temperature range
    from -52℃ to +80℃.

  • 0.6/1kV CU/XLPE/LSZH/SWA/LSZH Power Cable

    0.6/1kV CU/XLPE/LSZH/SWA/LSZH Power Cable

    For used in power transmission and distribution system, suitable for outdoor use at temperature range
    from -52℃ to +80℃.

12 Next > >> Page 1 / 2